Tecpro Australia

Pigtail nozzles offer clog-free dust suppression

User — Tue, 14 Feb 2012 03:29:04 +0000

PNR’s Spiral Nozzle – shaped like a pig’s tail – is a powerful ally in the fight against fugitive dust in mines, quarries, recycling plants, building sites and more

The unique design of the PNR Spiral Nozzle makes it ideal for suppressing dust in situations where there is a risk of clogging.

“Because it doesn’t contain an internal swirling vane, fluids can pass through very freely,” said Graeme Cooper, Managing Director of Tecpro Australia, exclusive distributor of the PNR range in Australia and New Zealand. “This means that this type of nozzle easily tolerates the flow of dirty recycled water, which is often used in dust suppression.”

The PNR Spiral Nozzle atomises fluid into fine droplets which is dispersed in a full cone pattern.

“The fluid hits the spiral blade and fans out in a circular pattern,” said Mr Cooper. “Because this nozzle has a relatively large internal chamber, it poses little resistance. This means that the nozzle is much less likely to clog up, compared with conventional nozzles.”

The pigtail design used in the PNR Spiral Nozzle has been used successfully in a variety of environments over several decades.

“Apart from being used for dust suppression, it is also highly effective in fire protection, evaporative cooling and other situations where a fine vapour is needed and there is a risk of clogging,” said Mr Cooper.

Tecpro Australia offers a wide range of dust suppression solutions including fog makers and low pressure, high pressure and ultrasonic products. The company also offers an on-site consultancy service to guide and advise clients on the best choice of dust suppression system to suit their environment.

“Every situation is completely different,” said Mr Cooper. “We draw on several decades of experience in making our recommendations to eliminate the dust problems being experienced by our clients.”

View more Press Releases

Tough and tolerant tangential nozzles are easy to install

User — Tue, 14 Feb 2012 01:57:12 +0000

As the exclusive Australian and New Zealand distributor of the PNR range, Tecpro is pleased to offer the easy-to-fit PNR Tangential Nozzle that suppresses dust in even the most challenging conditions.

Manufactured from tough glass filled polypropylene, the PNR Tangential Nozzle is durable and effective in suppressing fugitive dust in a range of environments.

Its large internal chamber makes the nozzle clog-free in most applications, making it suitable for use even with dirty recycled water.

“Its off centre spray chamber design produces fine droplets, even with large volumes of water being used,” said Graeme Cooper, Managing Director of Tecpro Australia. “The micro-sized water droplets that are produced are similar in size to the dust particles, making it easier for them to combine and fall to the ground aided by gravity. This makes the PNR Tangential Nozzle ideal for dealing with dust problems in many settings such as underground and open cut mines, quarries and recycling plants for example.”

A key advantage of the PNR Tangential Nozzle is the availability of a matching clamp, enabling it to be quickly installed to spray bars.

“It is simply a matter of drilling a hole in the water pipe. The hinged clamp goes over the pipe, a spigot fits into the hole and is sealed by an O-ring. A single stainless steel screw is used to lock the clamp together. ” said Mr Cooper. Because it’s such a straightforward installation, it saves a lot of time and labour costs.”

Both the nozzle and clamp are made of corrosion resistant, glass reinforced polypropylene. This also makes them cost effective to manufacture.

“The PNR Tangential Nozzle tolerates a certain amount of matter in the water,” said Mr Cooper. “This makes it a fuss-free choice when it comes to selecting an effective dust suppression solution.”

The technical team at Tecpro Australia is experienced in advising on all aspects of dust suppression. An on-site dust suppression consultancy service is also available. Enquiries about their products and services can be made by phoning 02 9634 3370.

View more Press Releases

Dust Suppression in Opencut Mining – Fog Makers & Water Cannons

User — Mon, 09 Jan 2012 03:05:37 +0000

Fog makers are used to suppress airbourne dust, while water cannons are used to wet stockpiles to prevent dust becoming airbourne.The fog makers are usually located a distance away from the source of the fugitive dust and encapsulate the dust particles in the air, causing them to become heavy and fall to the ground.
Water cannons are usually mounted at the base of stockpiles and the water jet stream is broken up by a stream breaker which causes the stream to produce a mass of droplets that wet the entire stockpile.

Should you wish to discuss your applications with our technical consultants call + 61 2 9634 3370 or emailsales@tecpro.com.au

Giraffa Fog Maker

User — Mon, 09 Jan 2012 03:04:48 +0000

Distance – Approx 25 mtrs

Flow Rate : 5.3 l/m – 40 l/m

Pressure : 3 – 10 bar

See Dust Suppression Equipment

Elefante Fog Maker

User — Mon, 09 Jan 2012 03:04:11 +0000

Distance : Approx 60 meters

Flow Rate : 8.5 l/m – 87.6 l/m

Pressures : 3 – 10 bar

See Dust Suppression Equipment

Water Cannons

User — Mon, 09 Jan 2012 03:02:29 +0000

Distance : Approx 41 meters

Flow Rate : 159 l/m – 617 l/m

Pressure : 2 – 5 bar

Download Water Cannons PDF

Underground Coal Mine Dust Suppression

User — Mon, 09 Jan 2012 02:48:52 +0000

There are a variety of nozzles that can be used to suppress dust in underground coal mines. It’s important that the correct nozzles are selected to suit the particular location.
Frequently nozzles are used which spray an excessive amount of water which has the effect of flooding the area without having a significant impact on dust.

Misting Spray Nozzles

User — Mon, 09 Jan 2012 02:46:57 +0000

Spray Pattern : Hollow cone

Flow Rate : 0.056 l/m – 0.67 l/m

Pressure : 7 bar – 120 bar

More Information on Misting Spray Nozzles

High Pressure Trigger Guns

User — Tue, 27 Dec 2011 01:48:01 +0000

RL37 High Pressure Gun

User — Tue, 27 Dec 2011 01:47:30 +0000

Brass Body, 3/8″ BSPF Inlet, 1/4″ BSP female outlet.

Rated Temperature 160deg.C, rated flow 40 l/min. Rated Pressure

- 310 Bar, 4500 PSI

RL16 High Pressure Gun

User — Tue, 27 Dec 2011 01:44:45 +0000

Brass Body, 1/4 ” BSPF Inlet, 1/4″ BSP female outlet.

Rated Temperature 100deg.C, rated flow 30 l/min. Rated Pressure

160 Bar, 2300 PSI

A tough but economical gun which is suitable for both high pressure & low

pressure washdown applications.

Ergonomic – Low Flow (Blue) RB 65

User — Fri, 23 Dec 2011 02:09:07 +0000

Chromed Brass Body, 1/2″ BSPF inlet,

Flow rate 60 l/min @ 20 bar.;

Max. pressure rating 24 bar (350 PSI)

Temperature Rating – 90deg.C

Part No. TEC6465

Ergonomic – Low Flow (Red) RB65

User — Fri, 23 Dec 2011 02:06:24 +0000

Chromed Brass Body, 1/2″ BSPF inlet, complete with 350mm intergral lance and handle.

Flow rate 60 l/min @ 20 bar.;

Max. pressure rating 24 bar (350 PSI)

Temperature Rating – 90deg.C

Part No. TEC6468

Ergonomic – 1/2” BSP

User — Fri, 23 Dec 2011 02:03:00 +0000

Outlet – RB65

Chromed Brass Body, 1/2″ BSPF inlet and outlet,

Flow rate 100 l/min @ 18 bar.;

Max. pressure rating 24 bar (350 PSI)

Temperature Rating – 90deg.C

Part No. TEC6453 – swivel inlet

Stainless Steel Lances of various lengths are available for this gun.

Filters, Fittings, Accessories & Spraying Systems

User — Wed, 21 Dec 2011 02:02:04 +0000

Precision Nozzle Accessories for Spraying Systems

When the appropriate spray nozzle has been chosen , the designers job is not yet accomplished. The global efficiency of the spraying system requires that properly designed fittings are chosen in order to assure ease of assembly, precise nozzle orientation and short servicing times.

Complete Spraying System Solutions

After having assisted our customers in the design and installation of several thousand spraying systems, where excellent results have been reached, we can offer a range of high quality fittings and accessories to complete the ideal spray system.

You may have the problem of fixing in position a flat jet nozzle assembly, to protect your spraying system against blocking, or any other difficulty which may be experienced with a spraying system. However, you can be sure to find an adequate solution from our range with many years of proven products reliability and spray application experience.

Air Blowing Nozzles

User — Wed, 21 Dec 2011 01:59:05 +0000

Round or Flat Spray Pattern
1/4″ BSP connections.
Round nozzles available in nickel plated aluminum or 316 stainless steel, flat nozzles available in Polyacetalic resin (POM), Acrylonitrile butadiene styrene (ABS) or nickel plated aluminum.

Download PDF file on air blowing nozzles

Mixing Eductors

User — Wed, 21 Dec 2011 01:56:08 +0000

Materials – 316 stainless steel or chemically bonded polypropylene, PVDF (3/8″ only)
Connections – 3/8″, 1/2″, 3/4″, 1 1/2″ and 2″
Max Temp – PP = 80 deg C, PVDF = 90 deg C

Download PDF on Mixing Eductors

Pipe Clamps, Metal Clamps and Clip Clamps

User — Wed, 21 Dec 2011 01:52:23 +0000

Material – Polypropylene or Stainless Steel
Suits 1/2″ – 2 1/2″ OD pipe
Maximum Working Temperature – 80 deg C
Maximum Working Pressure – 17 bar (Depending on Style of Clamp)

Download PDF on Clip Clamp

Filters

User — Wed, 21 Dec 2011 01:47:36 +0000

Material – Moulded Polypropylene, Nickel plated brass or Aluminum Casting
Connection – 3/8″ to 3″ BSPF
Mesh Size – Ranging from 32 to 150
Maximum Working Temperature – 100 deg C
Maximum Working Pressure – 20 bar (Depending on style of Filter)

Download PDF file on Filters

Pressure Tanks

User — Wed, 21 Dec 2011 01:45:02 +0000

Material – 304 Stainless Steel body, Synthetic Rubber handles and base
Capacity – 9 ltr or 19 ltr
Pressure – 9 ltr = 4 bar

19 ltr = 2.5 bar

Download PDF file on pressure pots

DynaFluid Mixing Valves

User — Wed, 21 Dec 2011 01:39:15 +0000

Tecpro Australia is proud to be the exclusive Australian & New Zealand distributor for Dynafluid who is one of the world’s leading suppliers of steam and water mixing valves. The core of their range is the steam/water mixing valve, a product that has built a strong international reputation for excellence since its introduction over 30 years ago.A commitment to continuous research and product development has ensured that this lead is maintained today – and will be tomorrow too.

DynaFluid 2000 Steam/Water Mixing Valve

User — Wed, 21 Dec 2011 01:38:14 +0000

The state of the art steam and water mixing valve – safe, versatile, practical, and low maintenance. Delivers reliable, economic hot water from your existing steam and cold water sources.

Cheap supply of hot water instantaneously.
Accurate temperature control
Extremely safe in operation – design ensures that live steam cannot exit the safety valve - automatic shut-off on cold water failure.
Available in four sizes – ½”,3/4″,1″, and 1½”, with flow rates from to 4 l/min to 350 l/min. Can be sized to suit a variety of supply pressures and flow rates.
Simple installation and maintenance

Tecpro Australia

Pigtail nozzles offer clog-free dust suppression

Tough and tolerant tangential nozzles are easy to install

Dust Suppression in Opencut Mining – Fog Makers & Water Cannons

Giraffa Fog Maker

Elefante Fog Maker

Water Cannons

Underground Coal Mine Dust Suppression

Misting Spray Nozzles

High Pressure Trigger Guns

RL37 High Pressure Gun

RL16 High Pressure Gun

Ergonomic – Low Flow (Blue) RB 65

Ergonomic – Low Flow (Red) RB65

Ergonomic – 1/2” BSP

Filters, Fittings, Accessories & Spraying Systems

Air Blowing Nozzles

Mixing Eductors

Pipe Clamps, Metal Clamps and Clip Clamps

Filters

Pressure Tanks

DynaFluid Mixing Valves

DynaFluid 2000 Steam/Water Mixing Valve

DynaFluid 3000 Hot & Cold Water Mixing Valve

SuperKlean Mixing Valves

SuperKlean D8000 Steam/Water Mixing Valve

SuperKlean 3600 Hot & Cold Water Mixing Valve

Sprayballs & Rotating Cleaning Heads | PNR Cleaning Heads CIP

Sprayballs – Fixed Spray Heads – Type UAA

Fixed Sprayheads – Type UAB

Rotating Cleaning Heads – Type UBB

Rotating Cleaning Heads – Type UBC

Rotating Cleaning Head – Type UBD

Rotating Cleaning Head – Type UBE

Compact Rotating Cleaning Head – Type UBF

Turbine Drive Rotating Cleaning Head – Type UBA

Two Axis Reaction Drive Head – Type UBL

High Pressure Tank Cleaning Heads | PA Cleaning Heads CIP

A80R Self Propelled Cleaning Heads

M25E Electric Driven Barrel Cleaning Heads

M28E Barrel Cleaners with Suction

A42R Self Rotating Cleaning Head

A42FR2 Self Rotating Cleaning Head

M63 Rotating Cleaning Head

MI63 Rotating Cleaning Head

GR38/200 – 400 Self Propelled Cleaning Head

CIP Rotating Cleaning Heads | Breconcherry CIP Tank Washers

Torus 50/75 Tank Cleaning Heads

Torus 100

Chemidisc

Clip-Disc

Sani-Disc

Turbodisc (TD)

Sanitor : No Ball Bearings

Turbo SSB : No Ball Bearings

2″ Troll Ball

3″ Troll Ball

Jumbo 6

Fury 400

Fury 602

Fury TWB (Tanker Wash Bay)

Fury TWB HP (Tanker Wash Bay High Pressure)

Typhoon

Tempest

Veri-Clean

Retractors

Ramex Stainless Steel Hose Reels | Retractable or Manual

AV 1000 – Stainless Steel – AV 1000 FE – Painted Steel

AV 1100 – Stainless Steel – AV 1100 FE – Painted Steel

AV 1200 – Stainless Steel – AV 1200 FE – Painted Steel

AV 1300 – Stainless Steel – AV 1300 FE – Painted Steel

AV 1500 – Stainless Steel – AV 1500 FE – Painted Steel

AV 2000 – Stainless Steel – AV 2000 FE – Painted Steel

AV 2050 – Air Vacuum Hose

AV 2200 – Stainless Steel – AV 2201 FE – Painted Steel

AV 2201 – Stainless Steel – AV 2201 FE – Painted Steel

AV 2300 – Stainless Steel – AV 2300 FE – Painted Steel

AV 3000 – Stainless Steel – AV 3000 FE – Painted Steel

AV 3015 – Stainless Steel – AV 3015 FE – Painted Steel

AV 3500 – Stainless Steel – AV 3500 FE – Painted Steel